Price: 683,161
Sofirn IF22A is a powerful EDC flashlight for indoor or outdoor use. It uses a single 21700battery and features a USB-C port for convenient recharging, a high efficiency DTP MCPCB board, a super bright LED with up to 2100 lumens. Furthermore, it uses sofirn’s user interface with both stepped modes and stepless ramping as well as a more advanced temperature regulation (ATR) with smart heat control.
Specifications:
Emitter: 1x Luminus SFT40 6000-6500K (cool white light beam, but not very cool. Because it's closer to 6000K actually)
Operating voltage: 2.8V—4.5V
Battery options: 1x 21700 rechargeable lithium-ion battery
IF22A Dimension: 127.1mm (length) × 42mm (head diameter)
IF22A Weight: 120 grams (without battery)
Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
Toughened mineral glass lens
Water resistance i.a.w. IPX-8 (up to 2 meter under water, not for diving)
Mode Memory: memorizes the last brightness level used in the general modes (Low/Med/High)
Reverse polarity protection from improper battery installation
Low voltage warning: When the battery voltage is too low, the LED indicator in the side switch will start to flash rapidly. Please recharge the battery.
Low voltage protection: The flashlight steps down automatically when the voltage is lower than 3.0V. It also turns off automatically if the voltage gets too low. Please recharge the battery.
Advanced Temperature Regulation (ATR) technology: As the temperature rises(above 55℃), IF22/IF22A is programmed to automatically step down and step up the brightness to prevent over-heating.
Choice:
1:without battery: including 1 flashlight, 1 user manual, 1 USB cable, 2 replace orings, 1 lanyard
2: with battery kit: including 1 flashlight,1 5000mah 21700 battery, 1 USB cable, 1 user manual, 2 replace orings,1 lanyard
Attentions: Due to the IF22A use TIR Optics Lens, this lens needs special cutting and molding, so there will be a little gap(as picture show).Please understand that this is definitely not a quality issue but cannot be avoided. So if you don't accept this, please carefully before place order! Thank you!
Leave a Reply