Notice that the metal clip can leave scratch if you disassemble it from the flashlight.
There are 2 kinds of current-version in stock now: 1400mA and 3000mA
Mode operation instructions:
1.click the button ——> flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down
2.flashlight off, press the button ——> moonlight mode 0.01A (0.2%) [This brightness will not be remembered]
3.flashlight on or off, 2-click the button ——> turbo 100%
4.flashlight off,3-click the button ——> strobe
5.flashlight off,4-click the button ——> tactical mode, only 100% ,4-click the button again to quit tactical mode.
6.flashlight off,5-click the button ——> voltage detection (* means "flash" , *** pause ******* means 3.7V, )
7.flashlight off,6-click the button ——> 4modes 0.1%moonlight-3%low-30%mid-100%high switch to normal ramping mode
8.flashlight off,10-click the button ——> Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.
The flashlight has low voltage protection and temperature control protection.
- Material: Aluminum Alloy
- Low voltage warning: Yes
- ON/OFF operation: click the side switch to turn the flashlight on,Press the side switch for one second to turn the flashlight off
- Charging current : max 1000mA
- Flux: 500LM or so
- Waterproof grade: IP65
- Reverse polarity protection: Yes
- Lens type: normal glass
- Reflector: orange peel reflector
- Mode memory: Yes
- Tailstand: Yes
- Battery included: No
- Required battery type: 18650 lithium (protected or unprotected)
- Required battery quantity: 1pcs
- Height: 114mm
- Width: 24.1mm
Now all hole 1/4 UNC